You register and configure the Edge Gateway in Installation & Maintenance (I&M).
If you have a local Internet network without DHCP, you will need to configure the gateway via the local configurator (via service port LAN 3).
There are more differences in what can be configured in the local configurator and what can be configured in I&M. The differences are listed below:
Action | Local configurator (via LAN 3) | I&M |
Register the gateway | X | √ |
Configure LAN 1 (Internet port) | √ DHCP on/off toggle | X DHCP always on |
Configure LAN 2 (Priva network port) | √ DHCP on/off toggle | Partly*: DHCP is always off (unless enabled via Local configurator). Not yet possible to turn on/off DHCP. * In a future release, it will be possible to turn on/off DHCP in I&M |
Configure the time zone | X | √ |
Add project (only for Building Automation) | X | √ |
Update the gateway | X | √ |
Download log files | Partly: just from the last 3 days | √ |
Reset to factory settings | √ | X |
Connectivity check | √ | X |